Zero Offset® Brake Kits

Zero Offset® Brakes Kits

We started designing these Zero Offset® brake kits back in the late 90's to move the wheels where they were with stock drum brakes. There is nothing that looks worst that a vintage car with late model looking wheels. Every muscle care needs the reverse rim look not matter what diameter wheels you are have. We have since developed our own design hubs and spindles to solve the problems associated with aftermarket and stock spindles and hubs. We are leaders not followers so, we started with a clean sheet of paper. You no longer have to wait for quality brake related parts. We have filed our patents on only a few inventions. As our patents are filed, the parts will be available to the public. All parts are made and assembled in the USA by American citizens.

Corvette Zero Offset Brake Kits

We have a wide selection of brake kits that will fit your specific needs for your Corvette. See our ZZ1 and ZR1 brake kits with custom drop spindles.

Check out the Gorilla Performance Bal Bar™ for the Corvette mounts dual master cylinders on your car using your stock pedals.

For information on ZZ1 and ZR1 Brake Kits: Use the links in the right hand column it will take you to Zero Offset's website. These are all special order kits and you will have to email us for pricing.

ZO1 Corvette Front Brake Kits

ZO1 Kits: This is our original kits that are designed for stock and after market spindles. Rotor sizes are between 0.810" to 1.25" comes gas vented with directional vanes or optional drilled and slotted zinc coated. Caliper brackets are limited to specific Zero Offset®, AP Racing and Wilwood calipers. Kits comes in 11.75" to fit 15" rims and 12.19" for 16" or larger. The smallest cacliper is 9.5" long with a brake pad size of 4.75" long brake pad.

11.75", 12.19" and 13" ZO1 Kits use the bigger Forged Superlite, DynaPro6 and Superlite 6 Piston calipers. We use these calipers in our basic brake kit, because they have a minium brake pad area of 8.2 sI and a volume of 4. ci. This larger pad area allow great friction with the same amount of pressure. Compare this to the Wilwood entry level Dynalite calipers with 6.38 si and 2.1 ci.

14" ZO1 Kits using the bigger W6A calipers have brake pad area of 11 si and a volume of 5.2 ci.

For Street/Track or Track applicaitons go to ZZ1 or ZR1 Kits.

WZO Corvette Front Brake Kits

WZO Kits: Special Zero Offset® kits from Wilwood Engineering that are designed for stock and after market spindles. Rotor sizes are between 0.810" to 1.25" comes with plain or drilled/slotted over the counter rotors from Wilwood. Some 13" and 14" kits move the wheels out slightly from stock track. The thicker rotors do no allow enough room to keep the track width at the stock location see our ZZ1 Kits using special spindles and hubs to maintain Zero Offset®. For custom applications see our ZO1 Kits in the chart above.

We also offer a line of replacment rotors and calipers to upgrade your C2/C3 with the new D8 aluminum calipers. Available in 4 and 6 piston design.