Zero Offset® Brakes Kits
The links in the right column will assist in answer all the question you might have about brakes. Zero Offset®Brake Kits come in 4 desinges:
ZO1 Kits: This is our original kits that are designed for stock and after market spindles. Rotor sizes are between 0.810" to 1.25" comes gas vented with directional vanes or optional drilled and slotted zinc coated. Caliper brackets are limited to specific Zero Offset®, AP Racing and Wilwood calipers.
ZZ1 Kits: Zero Offset® aluminum hubs, black anodized aluminum hats, 1.10", 1.25" and 1.38" thick slotted and balanced rotors, bearings, seals and grade 8 hardware for safety wire. 3" wheels studs available upon request at no additional charges. Kits require our Zero Offset® spindles and caliper brackets made for the 3.5", 5.25" and radial mount. Designed for all Wilwoods and specific AP Racing, Coleman and Outlaw calipers. We will custom build brackets to fit your existing calipers upon request. (See Caliper Brackets) We can also custom build spindles to fit almost any car.
ZR1 Kits: Medium to Heavy Duty Race Kits with same components as our ZZ1 kit except with heat treated floating rotors. Not intended for Extreme Duty ( i.e. short track asphalt), but will fit the needs for most racing applications.
WZO Kits: Special Zero Offset® kits from Wilwood Engineering that are designed for stock and after market spindles. Rotor sizes are between 0.810" to 1.25" comes with plain or drilled/slotted over the counter rotors from Wilwood. Some 13" and 14" kits move the wheels out slightly from stock track. The thicker rotors do not allow enough room to keep the track width at the stock location see our ZZ1 Kits using special spindles and hubs to maintain Zero Offset®. For custom appliations see our ZO1 Kits.
Wilwood, AP Racing and Stainless Steel Brake Co Brake Kits: We order the complete line from these companies. For complete information email or call us. We will send you the PDF files through email. Email: Sales
OEM Brake Kits: We have complete line of OEM type brake kits using single piston calipers. These are in expensive kits to convert drum brakes to disc. Please read the Brake Article© before your purchase, these kits will not work on cars with little or no vacuum.
Brake Parts: Boosters, master cylinders and SS brake lines just to name a few.
Gorila Performance: This is the optium master cylinder set-up. Has an output pressure of 1400psi/master cylinder. Universal kit allows this application to be used with your stock brake pedal. Examples show the Corvette and Camaro application, but will fit all cars.
"Brake Article"© was written in 1994, before I started building our Zero Offset™ Brake Kits. After reading it you will know more than the next salesman you talk to. It has been read, down loaded, copied and counterfeited by many people. I am sure that it has saved someone's life. I have only changed some wordage from the original article. © 1994 to 2011 Dean Oshiro
"Frequent Asked Brake Questions"© was written as a quick reference on Brake questions. Hopefully this will make it easier for you to answer the questions you have.
Formulas: For that engineer that has to have his question answered in black or white.
Drawings and Instructions: Illistrationed drawings of ZO1 Kits with different Wilwood calipers.
Free with Front Brake Kit: When you purchase a front brake kit you receive free: Stainless steel flexible brake lines and fittings and free shipping to lower 48 states.
Free with Rear Brake Kit: When you purchase a rear brake kit you receive free: Emergency brake cables. Or kit without the emergency brake you recieve rear brake lines. Free shipping to lower 48 states.
Free with Front and Rear Kits: Emergency brake cables and front and rear stainless steel flexible brake lines and fittings and free shipping to lower 48 states. You also receive a $50 discount off the $99 value Wilwood 260-11179 vale with chrome bracket and stainless lines.
Zero Offset® Wilwood W6A and W4A 14" Brake Kits
These are brake kits using the W6A and W4A calipers. Go to the hyperlink in the right hand column for additional informaiton on calipers and rotors.
These links will provide you with the information you need to determine if this brake kit will fit your driving requirements. Should you have additional questions, please contact our Tech Department
Use the hyper link to download the instructions. Kits include stainless DOT approved brake lines and free shipping to lower 48 states. Adverage weight is 70-80 pounds (2 boxes) for international, Alaska and Hawaii. Black E-Coated or Zinc Drilled/slotted rotors and red calipers available at additional cost.
|
|
W6A and W4A 14" Brake Kits
W6A Big Brake Front Kits
W6AR calipers were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Direction staggered vane 14” rotors provide maximum cooling for sustained high heat durability.
W4A Big Brake Rear Parking Brake Kits
Billet W4A Radial rear disc kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. Billet W4A four piston calipers, 14” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs allow builders to personalize the style and performance for every application.
|
Ordering Information and Application Table:
|
|
1.) CR1-1411W4 (1) Rear kit for 10 or 12 Bolt with 2.80" Bearings
2.) Includes custom stock height spindles
3.) Includes custom 2" drop spindles
4.)
Will not fit All Wheel Drive, SRT-8, Police or HD Brake Option Vehicles.
5.) Ford applications see the following W4 kits
5a.) FR2-1411W4 Big Bearing Ford Early w/2.36" offset
5b.) FR4-1411W4 Big Bearing Ford Late w/2.50" offset
5c.) FR1-1411W4 Small Bearing Ford w/2.50" offset
5d.) FR5-1411W4 8.8" Ford w/2.50" offset (call us if you have a 3.25" offset)
5e.) FR7-1411W4 8.8" Ford 2005 up Mustang w/2.66" offset
6.) Select Rear Brake Kit based on rear end housing.
7.) CR9-1301 for Chevy 1500 with Superlite calipers. |
|
|
